LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Electronic Engine Controls - 3.5L DURATEC (202KW/275PS)) >> Removal And Installation >> Engine Oil Pressure (EOP) Sensor >> Installation

Engine Oil Pressure (EOP) Sensor: Installation

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: If the oil pressure sensor is to be reused, apply thread sealant.

    To install, reverse the removal procedure.

    Material: Thread Sealant (WSK-M2G350-A2)

scientia non olet · About LEMON Manuals