LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 138 (Electronic Engine Controls - 3.5L DURATEC (202KW/275PS)) >> Diagnosis And Testing >> Powertrain Control Module (PCM) >> Pinpoint Tests >> Pinpoint Test G: U0405, U0415, U0422, U0423, U1011, U1012 >> Pinpoint Test G: U0405, U0415, U0422, U0423, U1011, U1012

Pinpoint Test G: U0405, U0415, U0422, U0423, U1011, U1012

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    If the PCM does not receive messages from other modules within a certain time frame the PCM sets a DTC for invalid data.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM U0405:00 Invalid Data Received From Cruise Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the CCM.
    PCM U0415:00 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module 'A': No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.
    PCM U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the BCM.
    PCM U0423:00 Invalid Data Received from Instrument Panel Cluster Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the IPC control module.
    PCM U1011:00 Invalid Internal Control Module Monitoring Data Received from ECM/PCM: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the PCM.
    PCM U1012:00 Invalid Internal Control Module Monitoring Data Received from Anti-Lock Brake System (ABS) Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.

    Possible Causes 

    • Suspect Module

  2. G1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE MODULE SENDING INVALID DATA

    • Using a diagnostic scan tool, carry out the self-test for the module in question sending the invalid data.

    Are any DTC s present from the module sending the invalid data? 

    Yes  DIAGNOSE the module sending the invalid data. REFER to the appropriate article in the service information.
    No  DIAGNOSE the observable symptom.
scientia non olet · About LEMON Manuals