LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Electronic Engine Controls - 3.5L ECOBOOST (235KW/320PS)) >> Removal And Installation >> Turbocharger Boost Pressure (TCBP) and Charger Air Cooler Temperature (CACT) Sensor >> Removal

Turbocharger Boost Pressure (TCBP) and Charger Air Cooler Temperature (CACT) Sensor: Removal

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. NOTE: Removal steps in this procedure may contain installation details.

    Disconnect the Turbocharger Boost Pressure and Charge Air Temperature Sensor electrical connector.

    GFD839197Courtesy of FORD MOTOR COMPANY
  2. Remove the screw and the Turbocharger Boost Pressure and Charge Air Temperature Sensor.

    Torque: 3 Nm

GFD839198Courtesy of FORD MOTOR COMPANY