LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 137 (Electronic Engine Controls - 3.5L ECOBOOST (235KW/320PS)) >> Diagnosis And Testing >> Powertrain Control Module (PCM) >> Pinpoint Tests >> Pinpoint Test H: U0415, U0422, U1012 >> Pinpoint Test H: U0415, U0422, U1012

Pinpoint Test H: U0415, U0422, U1012

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    If the PCM does not receive messages from other modules within a certain time frame the PCM sets a DTC for invalid data.

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    PCM U0415:00 Invalid Data Received from Anti-Lock Brake System (ABS) Control Module 'A': No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.
    PCM U0422:00 Invalid Data Received From Body Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the BCM.
    PCM U1012:00 Invalid Internal Control Module Monitoring Data Received from Anti-Lock Brake System (ABS) Control Module: No Sub Type Information The PCM sets this DTC when the PCM receives invalid network data from the ABS module.

    Possible Causes 

    • Suspect Module

  2. H1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE MODULE SENDING INVALID DATA

    • Using a diagnostic scan tool, carry out the self-test for the module in question sending the invalid data.

    Are any DTC s present from the module sending the invalid data? 

    Yes  DIAGNOSE the module sending the invalid data. REFER to the appropriate Service Information
    No  DIAGNOSE the observable symptom.