LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2024 >> E-Transit Cutaway >> Repair and Diagnosis >> External Pages >> Different car >> Section 132 (Wheel Hubs And Bearings - Full Floating Axle - 10-Speed Automatic Transmission - 10R80) >> Removal And Installation >> Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups >> Removal

Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups: Removal

WARNING: This page is about a different car, the 2024 Ford Transit-350 HD, 2024 Ford Transit-350, 2024 Ford Transit-250, and 2024 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the wheel hub. Discard the outer wheel hub bearing. Refer to: Wheel Bearings, Wheel Hub Seal and Wheel Bearing Cups 
  2. Remove and discard the wheel hub inner seal.
    GFD836860Courtesy of FORD MOTOR COMPANY
  3. Remove and discard the slinger and the inner wheel hub bearing.
    GFD836861Courtesy of FORD MOTOR COMPANY
  4. Using the specials tools, remove and discard the outer wheel bearing cup.Use Special Service Tool: 205-153 (T80T-4000-W) Handle., 205-420 Remover, Wheel Hub Outer Bearing Cup (10 1/2).
    GFD836862Courtesy of FORD MOTOR COMPANY
  5. Using the general equipments, remove and discard the inner wheel bearing cup.Use the General Equipment: PunchUse the General Equipment: Rubber Mallet
GFD836863Courtesy of FORD MOTOR COMPANY