Traction Control Disabled (Sliding Car OFF Icon)

The stability-traction control is configured on/off from the console mounted switch, or turns off when a system fault is detected. The ABS module sends the traction control off indicator request message to the IPC to illuminate or turn off the stability-traction control disabled (sliding car OFF icon) RTT indicator based upon the system state.

Refer to ABS /Brake/Stability-Traction Control System Indication description for information on the conditions when the stability-traction control disabled indicator (sliding car OFF icon) is turned on.

When a MyKey® administrator has set the AdvanceTrac® feature to always on and a MyKey® programmed key is in use, the stability-traction control system cannot be disabled. The menu selection in the centerstack display used to disable the stability-traction control system does not display when a MyKey® is in use, but remains active for the MyKey® administrator to select the AdvanceTrac® always on feature off. The stability-traction control indicator still functions normally to indicate a stability-traction control system fault and a stability-traction control active event.