LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Mustang Mach 1, Standard Trans >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Electronic Engine Controls - 5.0L 32V Ti-VCT (359KW/486PS) (WU)/5.0L Ti-VCT V8 (343KW/466PS) (MF) - Mustang >> Removal And Installation >> Clutch Pedal Position (CPP) Switch >> Removal

Clutch Pedal Position (CPP) Switch: Removal

NOTE: Removal steps in this procedure may contain installation details.
  1. Disconnect the electrical connector and remove CPP switch from the bracket.
GFD718040Courtesy of FORD MOTOR COMPANY
scientia non olet · About LEMON Manuals