The fuel tank and lines consist of the:
- Saddle-type fuel tank.
- Quick connect fuel and vapor tube couplings.
- Easy Fuel™ (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
- A Fuel Pump Control Module (FPCM).
- Fuel rail.
- Fuel injectors.
- Fuel Tank Pressure (FTP) sensor (part of the fuel vapor tube assembly).
- Is a Closed Loop Pressure Control (CLPC) system.
- A replaceable an external in-line fuel filter (if equipped).
- A Fuel Pump (FP) and Sender Unit containing:
- The electric Fuel Pump (FP) and Sender Unit which provides pressurized fuel to the high pressure Fuel Pump (FP).
- A check valve which maintains system pressure after the pump is shut off.
- A pressure relief for overpressure protection in the event of restricted fluid flow.
- A lifetime fuel filter providing filtration to protect the fuel injectors from foreign material.