LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Mustang Mach 1, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel Charging And Controls - 5.0L 32V Ti-VCT (359KW 486PS) (WU) 5.0L Ti-VCT V8 (343KW 466PS) (MF) - Mustang >> Removal And Installation >> Fuel Pump Driver Module (FPDM) >> Removal

Fuel Pump Driver Module (FPDM): Removal

NOTE: The fuel pump driver module is located beneath the rear seat cushion on the left side.
  1. Remove the rear seat cushion. Refer to: Rear Seat Cushion .
  2. Disconnect the fuel pump driver module electrical connector.
    GFD717714Courtesy of FORD MOTOR COMPANY
  3. Remove the fuel pump driver module retainers, then remove the fuel pump driver module.
GFD717715Courtesy of FORD MOTOR COMPANY