PCM DTC Chart
| DTC | Description | Action |
|---|---|---|
| P06E4 | Control Module Wake-up Circuit Performance | RETRIEVE and RECORD all CMDTCs. If BCM DTC C113A:11 or C113A:15 is found, GO to Pinpoint Test C Clear all Diagnostic Trouble Codes (DTCs). RERUN the PCM self-test. If the DTC returns, CHECK OASIS for any applicable Technical Service Bulletins (TSBs). If no Technical Service Bulletins (TSBs) address this concern, INSTALL a new PCM. Refer to POWERTRAIN CONTROL MODULE (PCM) - 5.0L 32V Ti-VCT (359kW/486PS) (WU)/5.0L Ti-VCT V8 (343kW/466PS) (MF) . |
| P06E9 | Engine Starter Performance | If the engine does not crank, GO to Pinpoint Test A |
| P0830 | Clutch Pedal Switch "A" Circuit | GO to Pinpoint Test A |
| P1594 | Forced Engine Shutdown - Remote Start System Fault, No Unattended Vehicle Timeout | REFER to: Electronic Engine Controls - 5.0L 32V Ti-VCT (359kW/486PS) (WU)/5.0L Ti-VCT V8 (343kW/466PS) (MF) . |
| P1595 | Forced Engine Shutdown - Remote Start System Fault, Transmission Range Not In Park Position | REFER to: Electronic Engine Controls - 5.0L 32V Ti-VCT (359kW/486PS) (WU)/5.0L Ti-VCT V8 (343kW/466PS) (MF) . |
| P2535 | Ignition Switch Run/Start Position Circuit High | GO to Pinpoint Test D |