LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Explorer XLT, RWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 965 (Engine Cooling - 3.3L DURATEC-V6 - Hybrid (BP)) >> Removal And Installation >> Thermostat >> Installation

Removal And Installation: Thermostat: Installation

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install a new O-ring seal and lubricate it with clean engine coolant. Refer to: Specifications  .
  2. To install, reverse the removal procedure.
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding  .
scientia non olet · About LEMON Manuals