Pinpoint Test U: Camera Not Configured
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition APIM C1001:55 Vision System Camera: Not Configured Sets in continuous memory and on-demand in the APIM when the parking aid camera is not configured. BCM C1001:55 Vision System Camera: Not Configured Sets in continuous memory and on-demand in the BCM when the parking aid camera is not configured. IPMA B115E:55 Camera Module: Not Configured Sets in continuous memory and on-demand in the IPMA when the parking aid camera is not configured. IPMA C1001:54 Vision System Camera: Missing Calibration Sets in continuous memory and on-demand in the IPMA when the parking aid camera is not configured. IPMA C1001:78 Vision System Camera: Alignment Or Adjustment Incorrect Sets in continuous memory and on-demand in the IPMA when the parking aid camera is not configured. Possible Sources
- 360 camera alignment
- Rear Camera intialization
- U1 CARRY OUT THE PARKING AID CAMERA SYSTEM ALIGNMENT USING A DIAGNOSTIC SCAN TOOL
- Ignition ON.
- Using the diagnostic scan tool, carry out the parking aid camera alignment procedure. REFER to: 360 Degree View Camera Alignment
Did the parking aid camera initialization procedure complete successfully?
Yes The system is operating correctly at this time. No REFER to the parking aid camera initialization procedure to troubleshoot the concern. REFER to: Parking Aid Camera Initialization REFER to: 360 Degree View Camera Alignment