LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Base, FWD >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Evaporative Emissions - 2.5L DURATEC - Hybrid (121KW 164PS) (BG) >> Removal And Installation >> Fuel Tank Isolation Valve - Plug-In Hybrid Electric Vehicle (PHEV) >> Removal

Fuel Tank Isolation Valve - Plug-In Hybrid Electric Vehicle (PHEV): Removal

WARNING: Before beginning any service procedure, refer to health and safety warnings in General Information. Failure to follow this instruction may result in serious personal injury.
NOTE: Removal steps in this procedure may contain installation details.
  1. Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
  2. Remove the fuel vapor vent valve. Refer to: Fuel Vapor Vent Valve - Plug-In Hybrid Electric Vehicle (PHEV) .
    • Disconnect the electrical connector.

    • Remove the isolation valve.

GFD751179Courtesy of FORD MOTOR COMPANY