Fuel Tank Filler Pipe: Removal

WARNING: This page is about a different car, the 2022 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Removal steps in this procedure may contain installation steps.

Refer to: Gasoline and Gasoline-Ethanol Fuel Systems Health and Safety Precautions .
Disconnect the battery. Refer to: Battery Disconnect and Connect .
With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
Remove the LHR wheel and tire. Refer to: Wheel and Tire .
Remove the retainers and screws.
Torque: 18 lb.in (2 Nm)

Courtesy of FORD MOTOR COMPANY
Remove the retainers.

Courtesy of FORD MOTOR COMPANY
- Detach the quick connectors. Refer to: QUICK RELEASE COUPLING .
- Loosen the hose clamp.
  Torque: 35 lb.in (4 Nm)
Courtesy of FORD MOTOR COMPANY
Detach the clips and position the drain hose aside.

Courtesy of FORD MOTOR COMPANY
- Remove the bolts.
  Torque: 89 lb.in (10 Nm)
- Remove the fuel tank filler pipe from the vehicle.

Courtesy of FORD MOTOR COMPANY