LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Base, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1127 (Electric Powertrain Control - 3.3L DURATEC-V6 - Hybrid (BP) (Diagnosis & Testing - Removal & Installation)) >> Diagnosis And Testing >> Electric Powertrain Control >> Pinpoint Tests >> Pinpoint Test V: P0A4C

Pinpoint Test V: P0A4C

WARNING: This page is about a different car, the 2022 Ford Police Interceptor Utility and 2022 Ford Explorer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    Refer to Electric Powertrain Control - System Operation and Component Description .

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    SOBDMC P0A4C:00 Generator Position Sensor Circuit Range/Performance: No Sub Type Information This DTC sets when an error is detected with the position reading's rationality check.

    Possible Sources 

    • Inverter System Controller (ISC)

  2. V1 CHECK FOR APPLICABLE SERVICE ARTICLES

    • CHECK OASIS for any applicable service articles: TSB, GSB, SSM or FSA.

    Was a service article found? 

    Yes  DISCONTINUE this test and FOLLOW the service article instructions.
    No  INSTALL a new Inverter System Controller (ISC). Refer to Inverter System Controller [SOBDMC]  .