LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Active, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG)) >> Removal And Installation >> Radiator >> Installation

Removal And Installation: Radiator: Installation

WARNING: This page is about a different car, the 2022 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Install and lubricate new condenser fitting O-ring seals. Refer to: Specifications . .
  3. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding . .
  4. Fill and bleed the electric powertrain cooling system. Refer to: Cooling System Filling and Bleeding . , General Procedures).
  5. Check and fill the transmission fluid as necessary. Refer to: Transmission Fluid Level Check . .
scientia non olet · About LEMON Manuals