LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Active, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG)) >> Removal And Installation >> Cooling Module >> Installation

Cooling Module: Installation

WARNING: This page is about a different car, the 2022 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. Install and lubricate new condenser fitting O-ring seals. Refer to: Specifications .
  3. Evacuate, leak test and charge the A/C system. Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R1234YF Refrigerant Refer to: Air Conditioning (A/C) System Recovery, Evacuation and Charging - Hybrid Electric Vehicle (HEV), Vehicles With: R134A Refrigerant .
  4. Fill and bleed the cooling system. Refer to: Engine Cooling System Draining, Vacuum Filling and Bleeding  .
  5. Fill and bleed the electric powertrain cooling system. Refer to: Cooling System Filling and Bleeding .
  6. Check and fill the transmission fluid as necessary. Refer to: Transmission Fluid Level Check .
scientia non olet · About LEMON Manuals