LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Active, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 957 (Engine Cooling - 2.5L DURATEC - Hybrid (121KW/164PS) (BG)) >> Diagnosis And Testing >> Engine Cooling >> Symptom Chart

Symptom Chart

WARNING: This page is about a different car, the 2022 Ford Escape. However, it is still accessible from the selected car via links, so may be relevant.

Diagnostics in this service information assume a certain skill level and knowledge of Ford-specific diagnostic practices. REFER to: Diagnostic Methods .

Condition Actions
Loss of coolant GO to Pinpoint Test A 
The engine overheats. GO to Pinpoint Test B 
The engine does not reach normal operating temperature. GO to Pinpoint Test C 
The block heater does not operate correctly. (if equipped) CHECK continuity in all 3 power cable circuits. If any circuit measures more than 5 ohms, INSTALL a new power cable.
CHECK the resistance of the block heater. If the resistance does not measure between 30 and 40 ohms, INSTALL a new block heater. REFER to: Block Heater  .
The electric cooling fan is inoperative in one or more speeds or does not operate correctly. REFER to: Cooling Fan Control  .
The electric cooling fan stays on all the time. REFER to: Cooling Fan Control  .
Auxiliary coolant pump failure GO to Pinpoint Test E