Pinpoint Test X: U3000:42
WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
- Normal Operation and Fault Conditions
DTC Fault Trigger Conditions
DTC Description Fault Trigger Condition IPMB U3000:42 Control Module: General Memory Failure Sets in the IPMB when module RAM hardware fails. Possible Sources
- IPMB
- X1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMB (IMAGE PROCESSING MODULE B) SELF-TEST
- Ignition ON.
- Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).
- Wait 10 seconds.
- Using the diagnostic scan tool, carry out the IPMB self-test.
Is DTC U3000:42 retrieved?
Yes INSTALL a new IPMB, REFER to: Image Processing Module B (IPMB) . No The system is operating correctly at this time.