LIN Communication
WARNING: This page is about a different car, the 2022 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
The front parking aid camera (if equipped) and rear parking aid camera communicate with the BCM (without 180 degree view camera system) or the IPMB (with 180 degree view camera system), via a LIN circuit which is a dedicated single wire communication network.
The messages sent from the BCM or the IPMB to the cameras are:
- Camera configuration data
- Display manual zoom request
- Guideline on/off request (rear camera)
- Display 180 degree view request
- Trailer connection status (if equipped with trailer tow)
- Steering angle
- Standby enable/disable request
The messages sent from the camera to the BCM or the IPMB are:
- Camera status
- Display zoom status
- Display 180 degree view status
- Camera part number data
- Guideline status (rear camera)