LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Active, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1486 (Parking Aid - Vehicles With: 180 Degree Camera Parking Aid Camera) >> Removal And Installation >> Image Processing Module B (IPMB) >> Installation

Image Processing Module B (IPMB): Installation

WARNING: This page is about a different car, the 2023 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. To install, reverse the removal procedure.
  2. NOTE: Carry out this step only if a IPMB is being replaced.

    Using a diagnostic scan tool, begin the PMI process for the IPMB following the on-screen instructions.

  3. NOTE: Carry out this step only if a IPMB is being replaced.

    Initialize the IPMB. Refer to: Parking Aid Camera Initialization .

scientia non olet · About LEMON Manuals