LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2023 >> Escape Active, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1486 (Parking Aid - Vehicles With: 180 Degree Camera Parking Aid Camera) >> Diagnosis And Testing >> Parking Aid >> Pinpoint Test(s) >> Pinpoint Test X: U3000:42

Pinpoint Test X: U3000:42

WARNING: This page is about a different car, the 2023 Ford Bronco Sport. However, it is still accessible from the selected car via links, so may be relevant.
  1. Normal Operation and Fault Conditions 

    DTC Fault Trigger Conditions 

    DTC Description Fault Trigger Condition
    IPMB U3000:42 Control Module: General Memory Failure Sets in the IPMB when module RAM hardware fails.

    Possible Sources 

    • IPMB

  2. X1 CHECK FOR DIAGNOSTIC TROUBLE CODES (DTCS) FROM THE IPMB (IMAGE PROCESSING MODULE B) SELF-TEST

    • Ignition ON.

    • Using the diagnostic scan tool, clear the Diagnostic Trouble Codes (DTCs).

    • Wait 10 seconds.

    • Using the diagnostic scan tool, carry out the IPMB self-test.

    Is DTC U3000:42 retrieved? 

    Yes  INSTALL a new IPMB, REFER to: Image Processing Module B (IPMB) .
    No  The system is operating correctly at this time.