Turbine Shaft Speed (TSS) Sensor: Removal

1. With the vehicle in NEUTRAL, position it on a hoist. Refer to: Jacking and Lifting - Overview .
2. Remove the retainers and the underbody shield.

   Courtesy of FORD MOTOR COMPANY

3. Remove the left front wheel and tire. Refer to: Wheel and Tire
4. Remove the retainers and position aside the LH fender splash shield.

   Courtesy of FORD MOTOR COMPANY

5. Disconnect the TSS sensor electrical connector.

   Courtesy of FORD MOTOR COMPANY

6. Remove the bolt and remove the TSS sensor.

Courtesy of FORD MOTOR COMPANY