Pinpoint Test M: Noise, Vibration, Harshness
- Normal Operation and Fault Conditions
- Noise
- Check the engine drive accessories, suspension, CV joints and transmission fluid cooler tubes. REFER to: Noise, Vibration and Harshness (NVH) .
- Vibration
- Check the engine drive accessories, suspension, CV joints and transmission fluid cooler tubes. REFER to: Noise, Vibration and Harshness (NVH) .
- Inspect the park pawl and the park pawl actuator for damage or wear. REFER to: Transmission .
Possible Sources
- CV Joint
- Engine drive accessories
- Suspension
- Transmission fluid cooler tubes
- Internal transmission components
- Noise
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods