Pinpoint Test J: Shift Quality - Multiple Gears Affected
- Normal Operation and Fault Conditions
- Only gears 1, 2, 3, 4, 5 available
- Check the A clutch for an always applied condition. REFER to: A Clutch .
- Only gears R, 6, 7, 8, available
- Check the A clutch for a does not apply condition. REFER to: A Clutch .
- Only gears R, 4, 6 available
- Check the B clutch for an always applied condition. REFER to: B Clutch .
- Only gears 1, 2, 3, 5, 7, 8 available
- Check the B clutch for a does not apply condition. REFER to: B Clutch .
- Only gears 3, 7 available
- Check the C clutch for an always applied condition. REFER to: C Clutch .
- Only gears R, 1, 2, 4, 5, 6, 8 available
- Check the C clutch for a does not apply condition. REFER to: C Clutch .
- Only gears R, 1 available
- Check the hydraulic SOWC for an always applied condition. REFER to: Hydraulic Selectable One-Way Clutch Assembly .
- Only gears 2, 3, 4, 5, 6, 7, 8 available
- Check the hydraulic SOWC for a does not apply condition. REFER to: Hydraulic Selectable One-Way Clutch Assembly .
- Only gears 5, 6, 7, 8 available
- Check the E clutch for an always applied condition. REFER to: E Clutch .
- Only gears R, 1, 2, 3, 4 available
- Check the E clutch for a does not apply condition. REFER to: E Clutch .
- Only gears 2, 8 available
- Check the F clutch for an always applied condition. REFER to: F Clutch .
- Only gears R, 1, 3, 4, 5, 6, 7 available
- Check the F clutch for a does not apply condition. REFER to: F Clutch .
- No engine braking in M1
- Check the hydraulic SOWC for a does not apply condition. REFER to: Hydraulic Selectable One-Way Clutch Assembly .
Possible Sources
- Clutch stuck on
- Clutch stuck off
- Only gears 1, 2, 3, 4, 5 available
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods