Pinpoint Test B: No Engagement - Reverse
- Normal Operation and Fault Conditions
- No reverse
- Check the B clutch for a does not apply condition. REFER to: B Clutch .
- Check the hydraulic SOWC for a does not apply condition. REFER to: Hydraulic Selectable One-Way Clutch Assembly .
- Check for any other observable symptoms indicating the A, C, E and/or F clutch is stuck on. Resolve those symptoms first.
Possible Sources
- Clutch fault
- No reverse
Diagnostic steps are not provided for this symptom or DTC. REFER to: Diagnostic Methods