LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> Steering >> Power Steering >> Electronic Power Assist Steering Guided Routine Testing >> Pinpoint Tests >> Pinpoint Tests BQ: PSCM DTC U2100 Initial Configuration Not Complete >> DTC Trigger

DTC Trigger

This DTC is set if the PSCM configuration has not been completed or fails, or if the module flash programming has not completed or fails. This DTC is ALWAYS present in a NEW PSCM until the module is correctly configured and flashed. DO NOT install a new EPAS assembly for this DTC.

Make sure to download the latest PMI/IDS scan tool program to make sure you are using the latest available configuration data.

scientia non olet · About LEMON Manuals