Pinpoint Test Purpose

To verify PSCM DTC U2011 is present and provide diagnostics if DTC U2011 is currently present and active in the PSCM.

1. BJ1
   • Ignition ON, engine running.

     Carry out the PSCM self-test.

   • Is DTC U2011 Motor present and active in the PSCM? 

   Yes	No
   INSTALL a new EPAS steering column. REFER to the Steering Column article. ORDER a replacement EPAS column and INCLUDE the RVC on the order form. If this is a Ford paid repair, INCLUDE the on the RVC warranty claim form.	The condition causing the DTC to set is not present at this time. DISCONTINUE this test and REFER to the DTC Chart.