Section 9 (Engine - 2.5L DURATEC (125KW/170PS)): Specifications: Rings
WARNING: This page is about a different variant/trim than selected.
| Item | Specification |
|---|---|
| Width - top | 1.17-1.19 mm (0.0460-0.0469 in) |
| Width - 2nd | 1.17-1.19 mm (0.0460-0.0469 in) |
| Width - oil | 2.38-2.45 mm (0.093-0.096 in) |
| Ring gap (in bore) - top | 0.16-0.26 mm (0.006-0.0102 in) |
| Ring gap (in bore) - 2nd | 0.31-0.46 mm (0.012-0.018 in) |
| Ring gap (in bore) - oil | 0.15-0.40 mm (0.0059-0.0157 in) |