Section 9 (Engine - 2.5L DURATEC (125KW/170PS)): Specifications: Crankshaft
WARNING: This page is about a different variant/trim than selected.
| Item | Specification |
|---|---|
| Main bearing journal diameter | 51.978-52.002 mm (2.046-2.047 in) |
| Production repair | 51.730-51.750 mm (2.036-2.037 in) |
| Main bearing clearance | 0.016-0.047 mm (0.0006-0.0015 in) |
| Connecting rod journal diameter | 51.978-52.002 mm (2.046-2.047 in) |
| Production repair | 51.730-51.750 mm (2.036-2.037 in) |
| End play | 0.220-0.450 mm (0.008-0.018 in) |