Section 9 (Engine - 2.5L DURATEC (125KW/170PS)): Specifications: Camshaft
WARNING: This page is about a different variant/trim than selected.
| Item | Specification | ||
|---|---|---|---|
| Lobe lift - intake | 9.44 mm (0.371 in) | ||
| Lobe lift - exhaust | 8.18 mm (0.322 in) | ||
| Runout (1)(1) | 0.03 mm (0.001 in) | ||
| Thrust clearance | 0.09-0.24 mm (0.003-0.009 in) | ||
| Journal diameter | 24.96-24.98 mm (0.982-0.983 in) | ||
| Journal-to-bore clearance | 0.035-0.080 mm (0.001-0.003 in) | ||
|
|
|||