Torque Converter Seal: Installation

WARNING: This page is about a different variant/trim than selected.

Install a new torque converter hub seal on the special tool. Use Special Service Tool: 307-627 Installer, Converter Seal.

Courtesy of FORD MOTOR COMPANY
Using the special tool, install a new torque converter hub seal. Use Special Service Tool: 307-627 Installer, Converter Seal.

Courtesy of FORD MOTOR COMPANY
Install the torque converter hub seal snap ring.

Courtesy of FORD MOTOR COMPANY
NOTE: The torque converter is heavy. Be careful not to drop it or damage will result.

Using the special tools, install the torque converter. Use Special Service Tool: 307-091 Handle, Torque Converter.

Courtesy of FORD MOTOR COMPANY
Install the special tool. Install Special Service Tool: 307-566 Retainer, Torque Converter.

Courtesy of FORD MOTOR COMPANY
Remove the transmission from the bench-mounted holding fixture. Use Special Service Tool: 307-003 (T57L-500-B) Holding Fixture, Transmission, 307-625 Fixture, Bench Mounting.

Courtesy of FORD MOTOR COMPANY
Remove the special tool. Use Special Service Tool: 307-625 Fixture, Bench Mounting.

Courtesy of FORD MOTOR COMPANY
Install the transmission.