Fuel System - Overview: Overview: Notes
WARNING: This page is about a different variant/trim than selected.
The fuel system:
- is a 2-speed Mechanical Returnless Fuel System (MRFS) with sequential MFI Multi- Port Fuel Injection (MFI).
- uses a single container fuel tank.
- has a fuel level sensor assembly.
- has a Fuel Pump that operates on low speed (11-12 volts) depending on load, that supplies fuel under pressure to the fuel rails.
- has a lifetime fuel filter (serviced as part of the Fuel Pump).
- has an Easy Fuel™ (capless) fuel tank filler pipe assembly, which cannot be modified in any way and is serviced only by the installation of a new fuel tank filler pipe assembly.
- has a supplemental refueling adapter located in the glove box.
- has a FPDM located on the driver's side lower "C" pillar area.
- has fuel tubes (liquid and vapor) along with brake tubes mounted on the underside of the vehicle in a bundle.
- uses separately controlled fuel injectors for each cylinder. The fuel injectors are mounted directly into the head.
- fuel injectors are supplied with pressurized fuel from the high pressure, in tank Fuel Pump to the fuel rail.
- has a serviceable fuel level sender mounted on the Fuel Pump Module