Starter Motor Drive Gear and Flywheel Ring Gear Inspection
WARNING: This page is about a different variant/trim than selected.
For information on Ford Color Coded Illustrations refer to OEM COLOR CODING .
Activation
-
WARNING: Before beginning any service procedure, refer to Safety Warnings in General Information . Failure to follow this instruction may result in serious personal injury.
Refer to: Health and Safety Precautions .
- Refer to: Starter Motor .
- Check the wear patterns on the starter drive gear and the flywheel or flexplate ring gear. If the wear pattern is normal, install the starter motor. Refer to: Starter Motor
.
- If the starter drive gear and the flywheel or flexplate ring gear are not fully meshing and the gears are scored or damaged, install a new starter motor. Refer to: Starter Motor .
- If necessary, install a new flywheel or flexplate. Refer to: Flexplate .