LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Electronic Engine Controls - 2.5L DURATEC (125KW/170PS)) >> Description And Operation >> Electronic Engine Controls - System Operation and Component Description >> Component Description >> Camshaft Position (CMP) Sensor

Camshaft Position (CMP) Sensor

WARNING: This page is about a different variant/trim than selected.

The CMP sensor detects the position of the camshaft. The CMP sensor identifies when piston number 1 is on its compression stroke. A signal is then sent to the PCM and used for synchronizing the sequential firing of the fuel injectors. Coil on plug (COP) ignition applications use the CMP sensor signal to select the correct ignition coil to fire.

Engines with 1 camshaft and VCT are equipped with 1 CMP sensor. The sensor identifies the camshaft position.

The 1 sensor system on engines with 1 camshaft and with VCT use the following CMP sensor signal circuit names: CMP11 - bank 1, sensor 1.

scientia non olet · About LEMON Manuals