Pickup Bed

The pickup bed consists of: 

• Styleside pickup bed.
• Pickup box tie-down hooks.
• Body side wheel opening splash shield.
• Rear-wheel opening mouldings.

The styleside pickup bed: 

• Is available in lengths of 6.75ft (2, 057.4mm) and 8.0ft (2, 438.4mm).
• Is double-wall aluminum construction.
• Is offered in single and dual rear wheel configurations.
• Is constructed of aluminum stamped inner side, outer side, and front panels and tailgate.
• Dual rear wheel fenders are constructed of ABS (Acrylonitrile Butadiene Styrene).

Each panel making up the pickup bed is separately serviceable. For additional information, refer to: Pickup Box Corner Reinforcement . For additional information, refer to: Pickup Box Floor Panel . For additional information, refer to: Pickup Box Inner Side Panel . For additional information, refer to: Pickup Box Outer Side Panel . For additional information, refer to: Rear Wheelhouse .

Styleside pickup beds: 

• Come standard with 4 pickup bed tie-down hooks.

The tailgate assembly consists of: 

• Tailgate.
• Tailgate hinges.
• Tailgate support cables.
• Torsion rod.
• Tailgate damper (if equipped).
• Tailgate step (if equipped).
• Tailgate step handle (if equipped).
• Rear view camera (if equipped).
• Power locking tailgate latch release (if equipped).

For power locking tailgate latch release diagnosis: For additional information, refer to: Locks, Latches and Entry Systems .