Pinpoint Tests Ta: Clutch Pedal Position (CPP) Switch: Introduction

WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.

This pinpoint test is intended to diagnose the following:

CPP sensor
harness circuits: CPP, CPP1, CPP2, CPP-BT, GND, SIGRTN, and VREF
PCM (12A650)

Fig 1: Powertrain Control Module-B (PCM-B) Connector

Courtesy of FORD MOTOR CO.

Harness Side

Circuit