DTC P2617 - Crankshaft Position Output Circuit/Open
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P2617 - CRANKSHAFT POSITION OUTPUT CIRCUIT/OPEN
| Description: | This DTC sets when PCM detects that the crankshaft position (CKP) sensor bias voltage is less than the calibrated minimum or greater than the calibrated maximum calculated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST JD . | ||