DTC P033A - Knock/Combustion Vibration Sensor D Circuit
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P033A - KNOCK/COMBUSTION VIBRATION SENSOR D CIRCUIT
| Description: | This DTC sets when the voltage goes outside a calibrated level. The knock sensor 22 (KS22) detects vibrations upon increase and decrease in engine RPM. The KS22 sensor generates a voltage based on this vibration. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | A KS22 sensor voltage greater than 0.5 volt with the ignition ON, engine OFF, indicates a concern is present. The vehicle may need to be driven for several minutes to set this DTC. |
||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DG . | ||