DTC P0111 - Intake Air Temperature Sensor 1 Circuit Range/Performance (Bank 1)
WARNING: This page does not describe the selected car, but rather 26 other vehicles, including the 2020 Lincoln Navigator, 2020 Lincoln Nautilus, 2020 Lincoln MKZ, 2020 Lincoln Corsair, and 2020 Lincoln Continental. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0111 - INTAKE AIR TEMPERATURE SENSOR 1 CIRCUIT RANGE/PERFORMANCE (BANK 1)
| For GTDI | |||
| Description: | This DTC sets when the intake air temperature (IAT) sensor value does not correlate with the charge air cooler temperature (CACT) sensor value or the intake air temperature 2 (IAT2) sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). If the IAT2 sensor is not present, the engine coolant temperature (ECT) sensor value or the cylinder head temperature (CHT) sensor value is used for the rationality test. This DTC also sets if the IAT sensor value exceeds the maximum calibrated temperature threshold while driving. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | The IAT sensor is located on the air filter housing. | ||
| For All Others | |||
| Description: | This DTC sets when the intake air temperature (IAT) sensor value does not correlate with the engine coolant temperature (ECT) sensor value or the cylinder head temperature (CHT) sensor value at ignition ON after a calibrated soak period (typically 6 to 8 hours). This DTC also sets if the IAT sensor value exceeds the maximum calibrated temperature threshold while driving. |
||
| Possible Causes: |
|
||
| Diagnostic Aids: | Make sure the IAT reading and the other temperature sensor readings are similar when the engine is cold. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST DA . | ||