LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 753 (Engine Controls - Powertrain (Diesel) - DTC P0300 - P124C) >> DTC P0602 - Powertrain Control Module Programming Error

DTC P0602 - Powertrain Control Module Programming Error

WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0602 - POWERTRAIN CONTROL MODULE PROGRAMMING ERROR

Description:  This DTC sets when a programming error within the vehicle identification (VID) block occurs.
Possible Causes: 
  • VID data corrupted by the scan tool during VID reprogramming
  • PCM reprogramming
  • Damaged PCM
Diagnostic Aids:  The VID block must be programmed. Refer to FLASH ELECTRICALLY ERASABLE PROGRAMMABLE READ ONLY MEMORY (EEPROM) , Programming VID Block. If the PCM does not allow reprogramming of the VID block, reflashing of the PCM is required.
Application  Key On Engine Off  Key On Engine Running  Continuous Memory 
All Refer to the Description, Possible Causes and Diagnostic Aids for the DTC.
scientia non olet · About LEMON Manuals