DTC P0343 - Camshaft Position Sensor A Circuit High (Bank 1 Or Single Sensor)
WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0343 - CAMSHAFT POSITION SENSOR A CIRCUIT HIGH (BANK 1 OR SINGLE SENSOR)
| Description: | This DTC sets when the PCM detects the CMP11 circuit signal is beyond the minimum or maximum calibrated limit. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST V . | ||