DTC P0341 - Camshaft Position Sensor A Circuit Range/Performance (Bank Or Single Sensor)
WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0341 - CAMSHAFT POSITION SENSOR A CIRCUIT RANGE/PERFORMANCE (BANK OR SINGLE SENSOR)
| Description: | The PCM monitors the camshaft position 1 (CMP11) sensor and crankshaft position (CKP) sensor signals during engine cranking. This DTC sets when the CMP1signal is inactive while the CKP signal indicates the engine is rotating. The PCM also monitors the CMP1sensor signal for electrical noise. This DTC sets when the electrical noise exceeds the calibrated threshold. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | Monitor the CMP_F PID while cranking the engine. | ||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST V . | ||