DTC P0340 - Camshaft Position Sensor A Circuit (Bank Or Single Sensor)
WARNING: This page is about a different car, the 2020 Ford F-550 Super Duty, 2020 Ford F-450 Super Duty, 2020 Ford F-350 Super Duty, 2020 Ford F-250 Super Duty, and 2020 Ford F-150. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0340 - CAMSHAFT POSITION SENSOR A CIRCUIT (BANK OR SINGLE SENSOR)
| Description: | This DTC sets when the PCM can no longer detect the signal from the camshaft position 1 (CMP11) sensor. | ||
| Possible Causes: |
|
||
| Diagnostic Aids: | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST V . | ||