DTC P2014 - Intake Manifold Runner Position Sensor/Switch Circuit (Bank 1)
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P2014 - INTAKE MANIFOLD RUNNER POSITION SENSOR/SWITCH CIRCUIT (BANK 1)
| Description: This DTC sets when the IMRC1 circuit voltage is greater than, or less than, a calibrated value. | |||
Possible Causes:
|
|||
| Diagnostic Aids: The IMRC1 sensor value should change when the IMRC is commanded open or closed. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | GO to PINPOINT TEST HU . | ||