DTC P0833 - Clutch Pedal Switch B Circuit
WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.
DTC DESCRIPTION P0833 - CLUTCH PEDAL SWITCH B CIRCUIT
| Description: The PCM monitors the clutch pedal position top of travel (CPP-TT) switch only during the calibrated engine speed range (cranking speed range). This DTC sets when the CPP-TT does not indicate that the clutch is disengaged (clutch pedal pressed) when the engine is cranked. | |||
Possible Causes:
|
|||
| Diagnostic Aids: Verify the vehicle was not push started with the clutch engaged. Check for aftermarket equipment such as remote starting devices which may bypass the CPP-TT switch when cranking the engine. Refer to the Cruise Control article, the speed control does not disengage when the clutch pedal is applied to continue diagnosis. | |||
| Application | Key On Engine Off | Key On Engine Running | Continuous Memory |
| All | Refer to the Description, Possible Causes and Diagnostic Aids for the DTC. | ||