DTC P052A - Cold Start Intake A Camshaft Position Timing Over-Advanced (Bank 1)

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

DTC DESCRIPTION P052A - COLD START INTAKE A CAMSHAFT POSITION TIMING OVER-ADVANCED (BANK 1)

Description: This DTC sets when the variable camshaft timing (VCT) position is over-advanced during cold start up. This DTC sets when the camshaft timing exceeds a maximum calibrated value or remains in an advanced position.
Possible Causes: Camshaft timing incorrectly set Continuous oil flow to the VCT piston chamber Variable camshaft timing bank 1 solenoid 1 (VCT11) valve stuck open Camshaft advance mechanism binding (VCT unit)
Diagnostic Aids: This DTC is a functional check of the VCT unit. Diagnose any base engine concerns related to the engine oil pressure or engine timing. Refer to the Engine System General Information article, Oil Pressure Test, to check the engine oil pressure. Refer to the Engine article, Timing Drive Components, to check the engine timing.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HK .