DTC P0443 - EVAP System Purge Control Valve A Circuit

WARNING: This page does not describe the selected car, but rather 24 other vehicles, including the 2019 Lincoln Navigator, 2019 Lincoln Nautilus, 2019 Lincoln MKZ, 2019 Lincoln MKT, and 2019 Lincoln MKC. However, it is still accessible from the selected car via links, so may be relevant.

DTC DESCRIPTION P0443 - EVAP SYSTEM PURGE CONTROL VALVE A CIRCUIT

Description: This DTC sets when the signal moves outside the minimum or maximum limit for the commanded state.
Possible Causes: VPWR circuit open EVAPCP circuit open EVAPCP circuit short to ground EVAPCP circuit short to voltage Damaged EVAP purge valve
Diagnostic Aids: To verify normal function, monitor the EVMV PID or EVAPCP PID and the signal voltage (PCM control side). With the valve closed, the EVMV indicates 0 mA (0% duty cycle for EVAPCP) and voltage approximately equal to battery voltage. When the valve is commanded fully open, EVMV indicates 1, 000 mA (100% duty cycle for EVAPCP) and a voltage drop of 3 volts minimum is normal.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	GO to PINPOINT TEST HX .