LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Abs Guided Routine - Pinpoint Tests B - BZ) >> Pinpoint Tests BS: Brake Wear Lining Sensor Fault >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

The BCM uses 2 normally-open switches, connected in series, to monitor the wear of the brake pads. As the brake pads wear, the switches close. Once fully closed, the BCM sends a message to the IPC to display a warning in the message center. 

PPT BS ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
C004A:13 Brake Lining Wear Indicator: Circuit Open This DTC sets when the BCM detects an open circuit condition in the brake lining wear indicator circuit.
scientia non olet · About LEMON Manuals