LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2022 >> Transit Connect Titanium, Gas/Ethanol >> Repair and Diagnosis >> External Pages >> Different car >> Section 745 (Abs Guided Routine - Pinpoint Tests B - BZ) >> Pinpoint Tests BM: Abs Module Communication Concern With ATCM >> Normal Operation And Fault Conditions

Normal Operation And Fault Conditions

WARNING: This page does not describe the selected car, but rather 9 other vehicles, including the 2021 Lincoln Corsair, 2021 Ford Transit-350 HD, 2021 Ford Transit-350, 2021 Ford Transit-250, and 2021 Ford Transit-150. However, it is still accessible from the selected car via links, so may be relevant.

With the ignition ON, the ATCM sends messages to the ABS module over the HS-CAN 2. If the ABS module does not receive these messages within a certain time frame (usually less than 1 second), the ABS module sets a DTCs. For information on the messages sent to the ABS module by the ATCM, refer to the Description and Operation in the  Anti-Lock Brake System (ABS) and Stability Control  article. 

PPT BM ABS MODULE DTC FAULT TRIGGER CONDITIONS

DTC Description Fault Trigger Conditions
U0138:00 Lost Communication With All Terrain Control Module: No Sub Type Information Sets when the ABS module does not receive any messages from the ATCM.
U0439:00 Invalid Data Received From All Terrain Control Module; No Sub Type Information Sets when an invalid mode message is sent from the ATCM.